• 3.5" colour touchscreen LCD• Separate stylus drive unit• Large range...
The new RTD-210 by Starr Instruments is an advanced surface roughness tester that provides the user with comprehensive testing capabilities. It is designed to allow testing on almost any surface, including difficult to access samples.
The separate stylus drive unit is attached on a 1mt long fly-lead to allow roughness measurement of both inside and outside bores on small diameter pipe or tube, stepped gears, o-ring grooves and recessed notches.
The RTD-210 uses a highly sensitive, diamond tipped stylus that accurately traces the surface, measuring the vertical deviations from the centre line. It is able to display the results in many parameters including Ra, Rz, Rq, Rt, Rp, Rv, Rsk, Rmr to name a few. The results are clearly shown on the high resolution, colour touch-screen LCD; including the waveform trace of the surface. Results can be saved to the 100 record internal memory and managed with software or downloaded via Bluetooth to the free App.
FEATURES:
Maximum Travel | 20mm |
Indicating Error | <±10% |
Accuracy | better than ±6% |
Measured Profile | Roughness, Waviness, Contour |
Parameter | Ra, Rq (0.005µm~30µm) Rz, R3z, Ry, Rt, Rp, Rm (0.02µm~320µm) |
Paramater | Rq, Rt, Rp, Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr, Ry(JIS), RMax, RPc, Rk, Rpk, Rvk, Mr1, Mr2 |
Filter | RC, PC-RC, Gauss, D-P |
Sampling Length "L" | 0.25mm, 0.8mm, 2.5mm |
Evaluation Length | (1-5)L |
Interface | USB, Bluetooth |
Power | Built in rechargeable battery |
Detection Principle | Current induction |
Stylus Force | 4mN (0.4gf) |
Stylus Tip | Diamond, 90°, 5µmR |
Calibration Template | included |